Boat Specifications

Make: Precision Boat Works Boats
Model: Precision 21
Year: 2020
Length: 20 ft. 9 in.
Type: Cruising Sailboats
Listing: 2153321
Buyer's Tools:

Similar Boats Nearby

We are sorry we could not find a local dealer in your area. Or any similar boats

Change Zip Code

This office has designed its share of large custom yachts, but our enthusiasm for smaller boats remains undiminished. We have found that small-boat sailors often derive far more satisfaction from their modest craft than jaded jet-setters do from one of their extravagant toys, and this has reinforced our continued determination to treat our smaller designs not as less significant, only less big. We have great pride in applying the same standards to all our work.

Our previous designs for Precision Boat Works are the Precision 18, one of the simplest and most affordable trailerables that can be practically cruised, and the Precision 23, one of the biggest cruisers that can be practically trailered. Our new Precision 21 design has been sized to fit right between her two sisters and is intended to appeal to sailors requiring neither the minimum cost of a mini, nor the extra space of a maxi-trailerable.

The great care that both designer and builder have put into the development of the Precision 21 is perhaps most clearly reflected in her interior. Her main cabin berths are laid out properly fore and aft. The optional head can be accessed without having to wake any children sleeping forward, and there is storage for toiletries under this same hinged cushion. The galley is not an awkward slide-away module, but a solidly built-in unit with a stainless sink, garbage bin, and alcohol stove. A 48-quart cooler is convenient to both the cockpit and the cabin and there is a large, dry storage area aft, accessible from inside the cabin. The battery box is located outside the living space in the large cockpit locker to starboard, and the centerboard pendant tube is protected by being fully enclosed inside the molded companionway step.

For small cruisers, a winged keel is more an inexpensive expedient than it is sensible to design. In order to be effective, the wings themselves need to be quite large, which makes them awkward and prone to damage at the launching ramp, and when it comes to mud-banks, it is with good reason that they are referred to as 'Danforth' wings! The Precision 21 features a more versatile and practical keel/centerboard combination, whose NACA 'wing section' foil can be fully extended for maximum efficiency upwind, fully retracted from minimum drag downwind, and left anywhere in between to fine tune the helm on a breezy reach. The board itself weighs only 70 pounds, and it will safely kick up and over underwater obstructions, giving ample warning of shoal water. "Easing off" after inevitable groundings can simply be a matter of raising the board.

The cockpit of the Precision 21 is over 7 feet long, and features seats and coamings precisely angled for comfort both with upright and when heeled. The inboard chainplates not only allow exceptionally close-winded performance to weather, but they leave ample side decks clear, providing unobstructed passage past the sleekly styled cabin house to the anchor locker forward.

Precision Boat Works shares our enthusiasm for small boats, and they have always executed our designs with meticulous care.
Draft: 4 ft. 8 in.
Beam: 8 ft. 3 in.
Displacement: 1875
Standard features:
LOA -- 20' 9"
LWL -- 17' 6"
BEAM -- 8' 3"
DRAFT, Board up -- 1' 9"
DRAFT, Board down -- 4' 8"
Displacement -- 1,875 lbs.
Ballast -- 600 lbs
Sail area -- 203 sq. ft.
Mast height above DWL -- 30' 0"

Standard Equipment

Hull and Deck
Iso/NPT gel coat finish
Hand laminated fiberglass construction
Molded-in non-skid surface
Shoal draft keel with fiberglass centerboard
Internal lead ballast
On deck anchor locker
Molded toe rails w/drains
Opening forward hatch
4-6" mooring cleats
Stainless steel bow pulpit
Stainless steel stern rail, stanchions & lifelines
Boarding ladder
Stainless steel bow eye
Teak trim
Accent waterline & sheer stripes
Teak handrails
2 fixed and 2 opening ports

7'1"self-bailing cockpit
Ventilated fuel tank locker
Sail locker
Laminated ash and mahogany tiller
Stainless steel adjustable motor mount
Welded aluminum rudder head
Fiberglass kick-up rudder

Molded 'structural grid' hull liner
Deluxe fabric covered cushions
Berths for 4 adults
Backrest cushions w/shelves
Shelves over v-berths
Molded storage lockers under berths
Head area located forward of bulkhead

12-volt electrical system
Fused switch panel
Interior lights
Navigation lights
Steaming light
Battery box

Spars and Rigging
Anodized mast & boom
4:1 'Harken' mainsheet system
Genoa winches & handle
"Harken" ball bearing blocks
Genoa track with cars
Prestretched Dacron halyards
Spliced halyard shackles
Prestretched Dacron sheets & running rigging
Split backstay
Chromed bronze open body turnbuckles w/toggles
Topping lift
Hinged mast step
Swaged stainless steel standing rigging

Alcohol Stove
Stainless steel sink
Manual water pump
Storage Bins
Self-contained water system
48 qt. Igloo ice chest with teak step

Dacron main and jib
Jiffy reefing system with 1 reef point

Contact PrecisionBWorks

Contact by Email

First name:
Last name:
Message: * Indicates Required Field

Contact by Phone

Contact by Mail

170 West
Draper, UT 84020
View our other classifieds listings
Page Views: 919