~Easier to Trailer, Rig and Ramp Launch The J/70 Speedster (22.75 feet) is J/Boats' first fully ramp-launchable, keelboat - designed to fulfill a growing need for an easy-to-own, high performance one-design that is exciting to sail, stable enough for the entire family, easy to tow behind the family vehicle, to rig in the parking lot, ramp launch and sail. Plus, the J/70 is built to last.
Draft: 4 ft. 8 in.
Beam: 7 ft. 3 in.
Displacement: 1750
Standard features: SPECIFICATIONS LOA: 22' 8" LWL: 20' 4" Beam: 7" 3" Standard Draft: 4.75 Standard Ballast: 630 Displacement: 1,750 Engine: outboard 100% SA: 226 I: 26.77 ISP: 30.15 J: 7.68 P: 26.16 E: 9.44 SA/Dspl: 25 Dspl/L: 91
STANDARD FEATURES
Construction J/70 hull laminated with biaxial and unidirectional E Glass fabrics and balsa core for rugged durability. Deck molded with similar glass fabrics and Corecell foam core. High density core material and additional glass reinforcements are placed in way of highly loaded hardware. All laminates are engineered and built to required ISO structural standards. Molded internal bulkheads and ring frames with gelcoat finish, bonded to the hull and/or deck. Molded lift-keel structure jigged, aligned and integrally molded during primary hull layup. High strength, inward turning and overlapping hull to deck joint bonded with structural adhesive. Molded non-skid on horizontal deck surfaces. 4.75' draft lifting keel with lead ballast featuring an internal leading-edge kelp cutting mechanism operable from the cockpit while underway, SS lock down plate and a single point lifting ring w/2:1 aluminum keel crane lift system. (2) Harken investment cast diamond boat lift pad eyes installed adjacent to keel P&S. High aspect transom mounted molded rudder. Lightweight aluminum outboard bracket mounted to transom.
Deck Large self-draining cockpit with molded foot braces on centerline. Molded companionway cover both hinged & removable with lockable drop board. Molded foredeck toe-rails P & S. SS custom fabricated chain plates for shrouds and backstay terminations. Interior ventilation hatch mounted on cabin house forward of mast. (2) Harken Snubber low profile primary winches with cam cleats. Two Ronstan black anodized jib T tracks with cars to accommodate 2:1 jib sheet terminations. Two sets of Harken cam cleats on side deck for direct cleating the jib sheet to leeward or windward. 5:1 Harken mainsheet system leading to ratchet block and cam mounted on centerline swivel base. Adjustable mainsheet traveler with 2:1 control line and cam cleats P & S. Double ended backstay adjuster purchase system leading forward to P & S cam cleats. Internal bowsprit launching system to exit aft face of the cabin house to cam cleat. Harken Small Boat Underdeck headsail furling system with hoistable swivel and control line exiting aft face of cabin house to cam cleat. Tack line cam cleat mounted to starboard on cabin. Composite tiller with Ronstan tiller extension. (4) Spinnaker sheet blocks with (2) outboard of primary winches and (2) aft. (2) halyard lead blocks mounted at mast base. Four low height SS stanchions and two reinforced SS stern rails at transom corners. 12" SS safety lines surrounding the cockpit with comfort pads and termination points on deck edge forward of shrouds. Transom lifeline gate with quick release. Foredeck U-bolt for mooring/dock line attachment.
Spars & Rigging Selden Spars carbon fiber mast with single swept aluminum spreaders and stainless thru-bar attachment, carbon masthead crane, and mainsail luff track. Easy to raise and lower with deck step design and tabernacle system. Mast finished in satin black with contrasting white bands. Carbon fiber boom with internal 4:1 outhaul, mainsheet attachment point, outhaul and single reef sheaves. Finished in satin black with contrasting white bands. Carbon bow sprit with tack ferrule fitting, painted black finish and seal system mounted at sprit housing. 1 x 19 wire standing rigging with adjustable open body turnbuckles for shrouds. Double ended boom vang system. Running Rigging Package includes: Main, jib & spinnaker halyards Main sheet, spinnaker sheets, jib sheets Tack line, sprit control line Vang control line Traveler control lines Cunningham
Interior Air dry gelcoat finish on hull & deck surfaces Bench style molded seats P & S. Bin storage aft of seats. Molded liner platform with inspection port. Molded cockpit support bulkhead with inspection port. Anodized aluminum compression post to transfer mast step loads to internal hull structure. Molded entry step.