Research Sundance Boats - B18CCR Center Console

The B Series Boats have a 94" beam width. The B18CCR is our newest 2007 model and has a yacht finish front and rear deck connected with a gunwale ring cap. The ring cap gives the boat top sides a much more finished look and allows us to use a larger and stiffer rub rail. We also use the best 316 grade stainless steel cleats and fitting on these models. The ring cap also gives us a space to install rod holders under the coming rail for additional rod and gaff storage. The front deck still has the cushioned jump seats built into it with additional storage below.

This boat has the CC Console without a front seat as standard equipment and has our custom built triple rod racks mounted on both sides of console. The console is set up for a top mount binnacle control. A 33 gal fuel tank is located inside the console with a fuel fill located on the port side of the console. The instrument panel has a fuel gauge, voltmeter and a tachometer with a digital hour meter. A space is porvided for a 2" ingine monitor gauge. There is a Marinco stainless steel power point in the face of the dash for supplemental power for cell phones and hand held GPS instruments. A four switch electrical panel with curcuit breaker overoad protection, rule aerator pumps and automatic bilge pumps are standard. We have added wire conduits glassed into the floor at the hull edge for ease in pulling wires forward for trolling motors and other electrical equipment. A standard feature is a trolling wire harness and receptacle set using Ancor marine grade 8AWG tinned wire layed into the port side conduit for trolling motor.

The steering wheel is a 15" stainless steel wheel coupled to a Uflex No-Feed-Back helm using the newest planetary gear helm system for solid smooth steering with no transmitted engine torque back to the wheel. The custom molded lexan windshield and stainless steel console hand-rail are standard as well.

The stern and bow light poles are stored in clips under the front deck. The long rear deck has an 18 gallon aerated live well with a high speed pick up. The high speed pick up jets fresh water up to the bait well while the boat is in motion without the aerator pump running.

The helm seat is a 76 Qt. insulated cooler with a seat cushion and has a swing-back back rest. An excellent option is to mount a 72 Qt. igloo cooler and cushion in front of the CC console.
Draft: 0 ft. 6 in.
Beam: 7 ft. 10 in.
Fuel tank capacity: 34
Standard features:
Interior Standard Layouts
Yacht Finish Front Deck w/ Cushion Jump Seats
Storage under Hinged Front deck Jump Seat
Yacht Finish Gunwale Ring Cap connecting Decks
Horizontal Rod Racks under gunwale Ring Cap
Large Front Deck Storage Hatch
Short Yacht Finish Rear Deck w/ 1 Well & 2 Hatch
Aerated Well - port side aft
Aerated Well - port side aft (40 Qts.)


Installed Hardware & Accessories
Semi Rigid bolt on Rub Rail - Lazer Blue
Console Wind Shield & Stainless Steel Hand Rail
Stainless Cleat Set w/ Flush Mount Bow Cleat (5)
CC Center Console ( No front seat )
Rod Racks - pair on CC Console (3 of rods)(6)


Tops & Seats
74 Qt. Swing Back Rest Cooler Seat w/ Cushions


Fuel Systems
Fuel Tank in Console with Side Fill ( 34 gals. )
Console side fill w/ SS Gas Cap & integrated Vent


Electrical & Plumbing Systems
Bow Light (9" Pole) & Stern Light (folding 52" pole)
Light Poles Storage Clips under Front Deck
4 Switch Electrical Panel w/ circuit breakers
Tach w/ Hour, Fuel & Battery gauges
Marinco Power Point on dash
Trolling Wire Kit (6 AWG) from bow to stern
Battery Tray w/ Stainless Steel Hold Downs
Bilge Pump Kit w/ Auto Float / Manual over ride
Aerator Pump w/ High Speed Pick-Up


Steering Systems
U-Flex No-Feed-Back Steering System
Stainless Steel Steering Wheel (15 DIA.)
Custom Stainless Steel Wheel cap w/ laser cut logo