~New and Experienced Sailors
The A20's classic topside, modern underbody, gratifying speed, and single-handed ease make her a treat for seasoned sailors as well as those just getting started.
Her "sit in" cockpit provides a comfortable, dry sail. And she is a keelboat which means she can be left on a mooring without fear of blow-over, yet, she still is trailerable.
Beam: 6 ft. 10 in.
Standard features:
SPECIFICATIONS
Length overall: 20' 0"
Length water line: 17' 1"
Beam: 6' 10"
Draft: 3' 6"
Air draft: 30' 8"
Displacement; includes ballast: 1,900 lbs.
Ballast: 780 lbs.
Sail area: 220 sq. ft.
Sail area/disp: 22.95
STANDARD FEATURES
Hull
End grain balsa core
Vinyl ester resin gelcoat reinforcing layer
White gelcoat hull color
Molded single gelcoat boot stripe
Micron ablative bottom paint
Deck
Resin-infused GRP sandwich structure with biaxial reinforcing fabrics and end grain balsa
White deck with molded nonskid in buff or light grey
Keel
Fin with integral bulb for low center of gravity
One-piece lead casting alloyed with antimony, bolted to molded keel sump with 316 grade stainless steel bolts
Steering
Stainless steel rudder shaft w/composite rudder blade
Balanced spade rudder with elliptical blade
Low-maintenance, self-aligning bearings
Laminated teak tiller with extension
Stainless steel rudder head
Mast, Boom, and Sails
Aluminum mast and boom
Hoyt jib boom with light air extender
Rigid boom vang with 4:1 purchase
Mainsail with cover and jib
Bonding
Mast and chainplates bonded to ABYC standards
Interior
Single-piece, molded structural grid with integrated bulkheads bonded with Plexus adhesive
Single-piece, molded interior liner bonded with Plexus adhesive
Interior finished in off-white gelcoat
Deck Hardware
Adjustable backstay
Mainsheet system 3:1 ratio with fiddle blocks
Reef system with hook and 2:1 purchase
Stainless steel chainplates and stemhead fitting
Roller furling unit w/furling line led to cockpit
Spinlock rope clutches for main and jib halyards
(2) Line bags
Ensign, staff and socket
Color-coded sheets and lines
Teak toerails and coaming caps
(2) Seat lockers
Gear locker at helm
Teak seat edge trim
Mooring cleats, 2 aft, 1 forward with 2 bow chocks
Manual cockpit bilge pump operable from helm
Bilge access via plastic cockpit grate
Igloo cooler with hold-down brackets
Flush-mount safety re-boarding ladder
Optional features:
OPTIONAL FEATURES
Sunbrella or Ultraleather cockpit cushions
Compass
Gold leaf cove stripe
Topside awlcraft
Mid-boom mainsheet system
Torqeedo 3 HP electric motor w/removable bracket
Varnish exterior
Teak cockpit grate
Triad trailer
Tiller cover
Boom tent cockpit cover
Sail away kit (lifejackets, fenders, docklines, etc.)
