Boat Specifications

Make: Blackjack Boats
Model: Blackjack 224
Year: 2015
Length: 22 ft. 4 in.
Type: Bay Boats
Listing: 1530908
Buyer's Tools:

The BlackJack 224 represents the ultimate blend of prowess and performance, all wrapped together in a sleek and striking design from legendary boat builders Bill & Gary Kenner. From the smooth, dry ride of the "Carolina flare" bow to its classic "tumblehome" transom, the BlackJack 224 blends tradition and technology like no other boat on the market. Her hand-laid hull and deck are heavy-duty but lightweight. Reverse-angle, spray-reduction chines deflect the water with authority. A 15 degrees transom dead-rise melds into a concave bow V for superior shallow water command. Four lifting strakes enhance her precise tracking, with transom hull extensions that offset the weight of even the heaviest of outboards. Thanks to 100% composite construction, there's no wood to rot. Honeycomb-cored decks surrender zero flex. Three-inch-thick transoms are virtually crack-proof. All fiberglass parts are made with premium quality gelcoats and resins. The BlackJack comes standard with a generous amount of storage, including in-deck storage for up to 7 rods, all with lockable latches to keep your gear safe. All hinges, latches, cleats, and rod holders are cast stainless steel, and are resistant to the corrosiveness of saltwater. Dual insulated live wells, molded fiberglass tubs, and compression-molded, O-ring-sealed hatches are all hand-laid and manufactured to exacting tolerances. Forget "extreme makeovers." Make a date with your BlackJack dealer, and say hello to the love of your life.
Draft: 1 ft. 2 in.
Beam: 8 ft. 3 in.
Fuel tank capacity: 70
Standard features:
Specifications
Length: 22'4"
Beam: 8'3"
Draft: 1'2"
Fuel Capacity: 70 gallons
Dry Weight: 1950 lbs


Hull Form
15 degrees Dead-rise· Rough water capability combined with shallow water performance.
Carolina flare bow entry- Dryer, smoother ride in choppy water.
Spray reduction chine- Turns water down and away.
Four lifting strakes- Quicker and better tracking
Pocket Transom - Better hole shot speed and improved shallow water capability.
Transom hull extensions- Offsets heavier weight of engine.
Aft tumblehome- Easier access to water and fish.


Construction
100% Composite construction - no wood, no rot
3" Transom thickness - No flex, no cracking!
Foam filled fiberglass grid stringer system - Stiffer and lighter
100% Hand-laid hull and deck - Better strength and lighter weight
In-factory cored compression molded hatches- Better fit, quality assurance & color match.
Premium quality gelcoats and resins
Molded fiberglass tubs and boxes - No cheap plastic!
Coremat cored sides - Reduces print and adds stiffness
Cored decks - No flexing of floors
All under-deck compartments drain to bilge
Foam flotation exceeds Coast Guard requirements
All screws backed with composite panels or aluminum plate


Deck Layout and Features:
Pop-up anchor cleats• Anchor Locker • All dry storage boxes
Ten cubic feet bow storage • O-ring seal and slam close latches
Locking Rod storage with protective tubes
Wide flat gunwale top - step or sit usage. • Easy clean non-skid pattern
Forward fish box - insulated with thru-hull drain
Under gunwale rod storage with protective rod tubes
Large insulated center live-well with recirculator and fill
Two aft compartments for battery and misc. storage • Four gunwale rod holders
Two forward storage boxes • 1 1/2" splashwell drains
Recessed cast stainless steel hinges - Strong and no rattle
Custom Whitley cleats • Two custom drift anchor cleats

Features and Hardware
Cast stainless steel hinges - Not stamped or plated
Cast stainless steel rod holders with plastic inserts - Strong and durable
Hydraulic steering with cast stainless steel wheel with steering knob
Removable windscreen • 75-qt YETI cooler under leaning post
Forward live-well in console with fill and recirculator, 1 1/2" drains & overflows
Heavy gunwale trim w/stainless insert • Aluminum 1" handrail
Aluminum leaning post with storage under seat and 4 rod holders & foot rest
Wiring harness loom wrapped for chafe protection
6 gauge trolling motor harness with circuit breaker protection & tilt trim swith
All switches are circuit breaker protected • lighted live-wells • Horn
Separate accessory fuse panel for up to six extra circuits
50 amp circuit breaker protection with main battery switch
On deck courtesy lights • Recessed SS navigation lights in hull
1/2" SS bow and stern eyes • Custom color coordinated upholstery

Contact BlackjackNBS

Contact by Email

First name:
Last name:
Email:
Phone:
Message: * Indicates Required Field

Contact by Phone

Contact by Mail

BlackjackNBS
170 West
Draper, UT 84020
View our other classifieds listings
Page Views: 2110

Loading...