Research CW Hood Yachts Katama 30 Cruiser Boat

~The Katama 30 offers Downeast good looks in a highly contemporary package. Sweet lines and soft curves are married to high tech composite construction and an advanced control system. In addition to the standard steering wheel, a joystick is used to seamlessly integrate the jet drive and standard bow thruster, offering incredible maneuverability when the going gets tight.

The spacious cabin features over six feet of headroom, a well-equipped galley, enclosed head with shower, hanging locker and forward vee berth suitable for two adults, and abundant storage throughout. The standard cockpit arrangement provides comfortable seating for eight. She is available in both express and hardtop configurations, with a number of custom options to guarantee a perfect fit for your yachting needs.
Draft: 1 ft. 9 in.
Beam: 11 ft. 0 in.
Displacement: 9000
Fuel tank capacity: 110
Water tank capacity: 28
Holding tank capacity: 28
Standard features:
HULL

Vacuum-bagged, cored construction using biaxial
fiberglass materials for lasting strength
Structural grid with molded tanks and bilges,
polished gelcoat surfaces throughout
Molded rubrails and quarterguard rails with
polished stainless steel inserts
Blister resistant vinylester resins
Selection of hull colors
Selection of bootstripe colors
Selection of Awlstar® bottom paint


COCKPIT
Self-bailing with flush, stainless steel drains
Removable deck panels throughout for
complete access to systems and bilges
Hinged helm station provides complete access
to electronics and wiring
Concealed, pop-up electronics box
Complete Faria gauge package, black face with
stainless steel bezel
Custom engraved stainless steel wheel with
teak accents (16”)
Custom integrated joystick controls for waterjet
and bow thruster
Kobelt single-lever throttle/shifter
Custom power steering system
Ritchie powerboat compass (4”)
12V DC power outlet
(5) Red cockpit courtesy lights
(2) Pompanette white vinyl swivel helm seats
Molded fiberglass engine box with gas lifts,
day/full access and seating on top
(2) Molded fiberglass storage boxes with
varnished teak louvered sliders
(2) Large bilge/storage access hatches with
stainless steel hatch dogs
Hinged aft bench with teak face and large
storage compartment beneath
Varnished, louvered teak companionway door
with tinted overhead hatch and lock


SYSTEMS
Yanmar 440 hp marine diesel engine
Side-Power hydraulic bow thruster with
integrated controls at the helm
(4) Aquadrive® noise/vibration reducing engine
mounts
Aquadrive® drive shaft
Soundown sound deadening insulation (2”)
Quiet Centek wet exhaust system
Double-gasketed hatches in area of engine
Bronze raw water strainer with scoop
Manual fuel tank selector manifold and valves
Racor fuel filter
Isotemp 4 gal AC/DC pressurized water heater
Monitoring system for all onboard tanks
(2) Electric bilge pumps with auto float switches
High-capacity manual bilge pump for safety
Labeled Marelon® seacocks with plugs
(2) 12V extreme duty AGM marine batteries
30 amp shore power connection with cord
20 amp battery charger
Battery selector switch
Bass backlit breaker panel
High quality tinned wire throughout
High quality marine hoses, double-clamped
throughout



DECK
Cored construction with molded nonskid
Oversized backing plates for all hardware
Flush-mounted hardware throughout
2) Anchor locker access hatches with
stainless steel hatch dogs
2) Molded pop-out panels for fuel (2), water
and waste deck plates
Varnished teak windshield with safety glass
Varnished teak toe rail with (6) custom
integrated stainless steel chocks
2) Varnished teak handrails on cabin top
Varnished teak eyebrows on cabin sides
Large, tinted opening hatch on cabin top
4) Stainless steel opening portlights
Stainless steel pop-up bow cleat (10")
2) Stainless steel pop-up spring cleats (8")
2) Stainless steel pop-up stern cleats (10")
2) Stainless steel engine room vents
2) Recessed side deck drains empty
overboard at waterline


DECK CONTINUED
USCG approved navigation lights
(3) Variable speed electric windshield wipers
with washing jets
Selection of deck colors
US yacht ensign with varnished teak pole and
stainless steel socket with retaining pin
CW Hood burgee with varnished teak pole
and stainless steel socket with retaining pin


INTERIOR
Bulkheads finished in off-white Formica®
with teak accents
Interior hull sides finished in off-white
V-groove panels
Classic varnished teak and holly sole
(2) Sunbrella® vee berth cushions
Sunbrella® vee berth insert cushion
Enclosed head plumbed for hot/cold shower
Raritan PHII marine toilet with holding tank,
macerator and direct discharge
Vanity mirror, toothbrush and cup holder,
towel rack and toilet paper holder
(3) Frigast overhead red/white cabin light
(2) Frigast bulkhead reading lights
Isotemp AC/DC refrigerator with door custom
matched to interior finish
Origo alcohol/electric two-burner stove top
(2) Scandvik stainless steel sink
(2) Scandvik single lever chrome faucet
Hinged garbage bin
Selection of Corian® countertops
Hanging locker with rod, shelving and
storage beneath
2) Cork-lined drawers beneath vee berth
Shelving and storage throughout


OUTFITTING
USCG required safety equipment
Custom painted name and hail on transom
8) Life jackets
4) Docking fenders with non-abrasive covers
4) Nylon, double braid docking lines
Complete tool kit
Owner’s manuals.

Compass; Shore power; Shower;