Research 2017 - J Boats - J22

~2017 Jboats J22

Now with over 1,600 boats and an excellent class organization and one-design events, the J/22 is a lot of boat for the money and is ideal for community and yacht club sailing programs. She has a small cabin and V-berth and a large sit-in cockpit. This boat gets up and goes, not even leaving a rooster tail when planing under spinnaker.
Draft: 3 ft. 10 in.
Beam: 8 ft. 0 in.
Displacement: 1790
Standard features:
2017 Jboats J22 Standard Features


Specs
Dimensions ft/lb m/kg
LOA 22.50 6.86
LWL 19.00 5.79
Beam 8.00 2.44
Standard Draft 3.80 1.16
Standard Ballast 700 318
Displacement 1,790 812
Engine outboard outboard
100% SA 223 20.72
I 24.80 7.56
J 8.80 2.68
P 26.10 7.96
E 9.00 2.74
SA/Dspl 24 24
Dspl/L 117 117


Hull & Deck Construction
Lloyds approved Baltek end grained balsa core laminated construction.
Hand Lay-up E-glass in both hull and deck.
Hulls molded in one piece for fairness and finish.
Vinylester resin in outer hull skin for 10 year transferable blister warranty.
White gelcoat hull and deck.
Hi traction non-skid surfaces on deck and cockpit sole.
Deck and hull bonded with "Plexus" structural adhesive.
ORC sized white thermo-plastic toerails.
Structural main bulkhead glassed to hull and deck
Heavy-duty stainless steel chainplates bolted to main bulkhead.
Anodized aluminum compression post and bearing beam glassed into hull.
Molded interior watertight compartments.


Keel & Rudder
Lead & Antimony fin keel finished in VC Underwater Epoxy
Near minimum weight faired transom-hung rudder.
Heavy-duty SS rudder gudgeons and hardware.
Custom laminated tiller with hiking stick.


Spars & Rigging
Tapered Hall Spars aluminum class mast
Airfoil spreaders with thru‑bar spreader bracket.
Gibb "T" terminals, and black measurement bands.
Class Certified Boom w/Harken internal outhaul purchase.
Forespar spinnaker pole with ultra ends.
1 x 19 Standing Rigging with open body adjustable turnbuckles.
Complete class optimized running rigging kit.


Deck Hardware
Harken deck hardware kit including mainsheet traveler track and car, spinnaker blocks and hardware, backstay blocks, and halyard cleats.
Harken cabin top winches.
Schaefer race jib tracks and adjustable cars.
Bow chocks and 1 bow pad eye.
Stainless Steel hand rails.
Transom corner cleats.


Running Rigging
Main Halyard 5/16" T-900 w/Wichard shackle.
Jib Halyard 5/16" T-900.
Spinnaker Halyard ¼" XLS Extra.
Main Sheet 3/8” XLS.
Jib Sheet 3/8” STA-SET.
Spinnaker Sheets 5/16” STA-SET X Lite.
Backstay, Traveler and Twings ¼" Novetec Dinghy Braid.
Foreguy 5/16" Ultralite.
Vang Line 5/16” STA-SET.
Main Cunningham 1:1 - 1/8" Spectra and 3/16" Ultralite.