Boat Specifications

Make: Livingston Boats
Model: LV19
Year: 2015
Length: 18 ft. 5 in.
Type: Power Catamaran Boats
Listing: 1533691
Buyer's Tools:

Similar Boats Nearby

We are sorry we could not find a local dealer in your area. Or any similar boats

Change Zip Code


The LV19 is the star of the Livingston line. A true weekend war wagon that will get you to the fish. Whether its King Salmon in Alaska, Sharks off of the California Coast, Stripers out of Montauk, or Tarpon in the Keys, the LV19 will deliver. This ultimate offshore package will put big boat fishing well within your reach. (With the shallow draft
of a Livingston you can also trout fish inshore.) The LV19 will prove to be extremely stable under way or at rest. The LV19 is very efficient and fast with minimal power,
getting you to the fishing hole on-time without the extra motor cost or fuel expense.
Draft: 0 ft. 9 in.
Beam: 7 ft. 6 in.
Fuel tank capacity: 20
Max load: 1800
Standard features:
Specifications
LOA: 221"(18'-5")
Molded LOA: 221"(18'-5")
Beam: 90"(7'-6")
Draft: 9" (w/ 90HP)
Freeboard: 16"
Shaft Length: 20"
Apprx. Dry Weight: 1,600 lbs (hull only)
Max HP Rating: 115 HP
Fuel Capacity: 20 gal
Boat Capacity: 1,800 lbs (7 persons, motor and gear)
Typical Cruise*: 23 mph at 6.1 mpg
Typical WOT*: 39 mph at 4.1 mpg


Standard Features
100% composite construction (completely wood-free)
Unique twin hull design with tunnel lift appeals to shallow water enthusiast as well as those who like to fish in deeper waters
Buoyancy in twin-hull design allows more load bearing capacity,shallow draft, quicker planning, and a smoother ride
Twin-hull design provides more interior space than competitively sized mono-hulls
Twin hull design performs with smaller, lighter, and less expensive motors for better fuel efficiency
Constructed with high-gloss MAXGUARD exterior gelcoat, 24-oz hand laid woven roving, and durable flat interior finish with contrast
webbing
Reinforced outboard transom, fabricated with 1" thick Penske composite board encased in fiberglass, will not rot
Laminated sub-floor with foam-filled cavity encased in fiberglass
(will not absorb water if there is a hull breach)
Laminated-in fore and aft seating (not bolted-on) with (2) rear access hatches and (3) forward hatches
Curved SPRAY GUARD gunwale & protective gunwale edge trim
Fiberglass center console helm station with stainless steel steering wheel, acrylic windscreen, stainless steel grab rail,forward storage / seat, 20-gallon fuel tank, and horn
Helm bench /cooler seat with flip-forward seatback cushion (canbe plumbed for a livewell)
Rigging tubes under floor running console aft
Transom bilge pump in each sponson (2 x 500 gph)
6 switch panel: navigation lights, port bilge pump, starboard bilge pump, and (3) accessories switches
Navigation lights on each side of the console, the stern light aft on a 48" pole.
(2) motor well thru-hull drains and (3) transom garboard drains
(4) mooring cleats plus (1) stainless bow eye and (2) stern eyes


Optional features:
Stainless steel bow rail
Stainless steel forward grab rail
Stainless steel side rail
Keel strips on each sponson
Livewell


Motors
Yamaha 90 HP 4-stroke with control, tach, and prop
(remote motor F90LA)
Yamaha 90 HP 4-stroke with control, tach, and prop
(remote motor F90LA)

Contact Livingstonboats

Contact by Email

First name:
Last name:
Email:
Phone:
Message: * Indicates Required Field

Contact by Phone

Contact by Mail

Livingstonboats
Livingstonboats
Livingstonboats, UT 84102
View our other classifieds listings
Page Views: 2495

Loading...