2009 51ft. Junior Marine Motoryacht

Builder: Junior Marine

Dimensions

LOA: 51' Beam: 4.9m Displacement: 18.75 tons
Draft: .8m

Engines

Engine(s): Scania Engine(s) HP: 165/250 Engine Model: second hand
Max Speed: 28


Accommodations
All cabins(1 master + 2 single) will be furnished with beds, cupboards (mahogany covered) whatever seen on the plans, material like bed sheets, curtains and soft material is not included in yard delivery program
Water tabs and connections in all areas completed .
Toilette is standard house type toilette inorder to avoid technical defaults and to give guests comfort.
The ceilings of the cabins will be marin plywood covered with artificial leather
All the seatings will be covered leather
The interior cabin walls will be marin plywood covered with mahogany
All the interior ground will be Marin plywood+mahogany laminated with epoxy (with white rubbered fastened.)
Yard will deliver standard furnishing with above mentioned material only.

Galley
Galley delivered with working area, 1 unit fridge 220V, 1 unit 4 flame gas burner.
1 Fridge
1 Cooker
1 Microwave
1 Dishwasher
Mahogany Cupboards
Granite Work Bench

Electronics

VHF
GPS
Radar
Autopilot
Depth Sounder
Fishfinder

Electrical
Vessel consists of 220V shore connection and 24V electric system
All living areas inside have 220V and 24 V electric system
A minimal set of international Navigation Light is included on the vessel.
All areas like as engine room , WC , Galley , deck have electric system of 220V and 24 V, too.
A Battery set of 6 x 200 Ahmp , which are charged through main engine light engines , as well through shore power
3 pumps available.
Black and Grey Water Tank emptied through a Macerator connected both to open sea and main deck valve for emptying in Marinas.
Connection and aerial connection for TV & Stereo set available.
1 unit Depth Sounder
1 unit VHF
1 unit GPS

Deck and Machinery
Teak Deck
Stainless Steel railways and window frame
anchor winch and galvanized chain
Wood material of frame is: Pine
Material of planking: 3 coats of marine plywood glued with epoxy
3 coats of epoxy with glass fiber
6 coats of epoxy paste
All wet areas like as WC and Shower areas to be Polyester or ceramic tiles.
In the bow,the frames have steel construction props.
Keel- laminated pine (5 coats)
paint (airbrush)/mahogany paint varnished (20 coats)
Vessel will be delivered fully varnished in all sections.
Launching is to be done by the yard and a sea trial will follow immediately after launching.
Engines are second hand 2 x 165/250 Hp.
Gear Boxes are 1/1.5


Contact the listing broker, Mitch Gutcho, for more information.
Contact eGlobal Yachts.
79 Chesterfield Road
Amston, CT 06231, USA
Toll-free 866-471-3675
Tel 860-604-1150
Fax 860-530-1038
Email mitch.gutcho@eglobalyachts.com

Page Views: